Downstream Processing

Use of Membrane Technology in Bioprocessing Therapeutic Proteins from Inclusion Bodies of

The ultimate goal of recombinant fermentation research is cost-effective production of desired proteins by maximizing volumetric productivity (to obtain the highest amount of protein in a given volume in the least amount of time). Bioprocessing for recombinant proteins using genetically modified organisms requires a stable, high-yielding recombinant culture, a highly productive fermentation process, and cost-effective recovery and purification procedures. Escherichia coli has been a widely used host for expression of recombinant proteins (1). Its advantages lie in the enormous data…

MAb Contaminant Removal with a Multimodal Anion Exchanger

Monoclonal antibodies (MAbs) constitute ∼30% of the biopharmaceutical products currently under development (1). An increasing demand for MAbs during the past decade has led to intense development of high-expression cell cultures (2). Today, it is possible to see titers of 4–5 g/L, and expression levels as high as 15 g/L and greater have been reported. As a consequence, demand has increased for more efficient downstream processes. That demand, combined with its potential for reducing time-to-market, has increased interest in the…

The Reoccurrence of Mycoplasma Contamination: Prevention Strategies

    The contamination of microbiological media by mycoplasmas such as Acholeplasma laidlawii is not a recent phenomenon. It has been a major problem with animal-derived sera since the 1980s and has been a concern in the management of cell cultures for decades. The main culprit of serum contamination was the inadequate blood collection methodology and was eliminated with the introduction of hollow collection needles. In addition to the introduction of an improved collection method, serum was filtered with 0.1…

Implementing Cost Reduction Strategies for HuMab Manufacturing Processes

    The combination of innovative and traditional process technologies has resulted in major advancements in the antibody industry, such as accelerated process development and time-to-market. In addition, this paper examines the avenues that have opened as a result of exploring established process technologies for new applications, as in the case of perfusion cell cultures to amplify dhfr-based expression cell lines by incrementally increasing selection markers in the perfusion medium for the faster generation of stable and high-productivity clones. Furthermore,…

Rapid Purification of Lys-C from Cultures

Endoproteases specific for cleavage of peptidyl bonds on the C-terminal side of lysine residues (e.g., Lys-C) are produced from a number of bacterial species, including Achromobacter lyticus (1), Pseudomonas aeruginosa (2), and Lysobacter enzymogenes (3). The Achromobacter protease 1 (API) protein has been substantially characterized (4,5,6) and shown to be a resilient enzyme that can specifically cleave after lysine residues under a wide range of buffer conditions, including high concentrations of denaturing agents such as urea and sodium dodecyl sulphate…

Purifying a Recalcitrant Therapeutic Recombinant Protein with a Mixed-Mode Chromatography Sorbent

Mixed-mode chromatography sorbents can save time and money by reducing the number of steps required to purify recombinant proteins. They also have the potential to purify proteins that single-mode sorbents cannot. As the term mixed mode suggests, these sorbents contain ligands that offer multiple modes of interaction. Although mixed-mode sorbents are used extensively in solid-phase extraction for high-pressure liquid chromatography (HPLC) sample preparation — and to a more limited extent in analytical HPLC — these resins are generally unsuitable for…

Quantifying Trends Toward Alternatives to Protein A

Problems associated with affinity purification in antibody production continue to increase as upstream cell culture expression levels improve. As a result, many vendors and users in the biopharmaceutical industry are working to identify alternative technologies that can replace tried-and-true column chromatography. In the fifth annual report and survey by BioPlan Associates, 434 global respondents pointed to bottlenecks created by downstream processes as one of their most serious manufacturing problems today (1). Amost two-thirds (63.8%) said their facility is experiencing some…

TFF Membranes for High MAb Concentration

In a typical monoclonal antibody (MAb) purification process, immediately after cell culture and supernatant clarification (its objective being to remove whole cells, cell debris, and particulates), the protein product is typically bound to an affinity chromatography resin and then recovered by elution using a buffer solution. Once recovered, the resulting protein solution is further purified through additional chromatography and virus clearance steps before being concentrated until a final solution is ready for filling and finishing operations. PRODUCT FOCUS: MONOCLONAL ANTIBODIESPROCESS…

How to Improve Your Implementation of Two-Dimensional Preparative HPLC

The biologics and natural product industries rely heavily on separation technology. Sample analyses are undertaken on the analytical scale, and isolation and purification are undertaken at the preparative scale. Key target components are often isolated to provide standard reference materials for future product quality assurance testing. These products are often very complex mixtures, requiring separation systems to have a high peak capacity for both analytical and preparative scale separations. A technique gaining popularity among companies that require the isolation of…

Modeling Flow Distribution in Large-Scale Chromatographic Columns with Computational Fluid Dynamics

Column chromatography remains a key unit operation in downstream processing of biopharmaceuticals. For most commercial processes, two to three chromatography steps are used to remove process-and product-related proteins, DNA and adventitious agents. As the biopharmaceutical industry has increased its product offerings and related demands, downstream processes have fast become a bottleneck (1, 2). Many commercial and clinical processes include a number of cycles on one or more chromatography steps to process the harvest from a single production batch. PRODUCT FOCUS:…